FLOOR REFURBISHMENT
On solid ground
No two floors are alike, which is why we offer a reliable solution for any substrate and any step in the work involved. It doesn’t matter whether you are working indoors or outdoors, under pressure of time or only making partial repairs to the existing floor. With PCI solutions, you can master any challenge.
Especially in the case of refurbishment work, a careful analysis of the existing structure is essential. Any defects such as cracks, spalling or loose surfaces must be properly repaired in advance of the work.
This section focuses on floors intended for direct use, fast-setting screed and floors exposed to moisture in inside and outside areas, e.g. garage floors.
The best cards for any challenge:
Refurbishment of floors for direct use
The floor repair products in the PCI Zemtec family are fast-setting, develop high strength, and are intended for direct use. Using these cement-based mortars, you can level irregular concrete and screed surfaces. Depending on the loads involved, you can either use the surfaces directly or seal them with an additional product.
Substrate preparation:
The substrate must be clean, firm, sound and free from any grease, old coatings or other residues.
1. Primer:
PCI Gisogrund 404: wash primer for absorbent and non-absorbent substrates. Apply two coats
2. Floor leveling:
PCI Zemtec 1K: Cement-based floor leveler for residential and commercial buildings, or alternatively PCI Zemtec 180: Flowable screed for direct use as bonded screed
3. Top sealing
PCI Zemtec Top: two-component aqueous polyurethane sealant for PCI Zemtec floors
Fast screed refurbishment
When time is of the essence on a construction site, you have to work fast. It is a good thing that PCI can offer the ideal solution with its PCI Novoment ready-mixed, fast-setting screed mortars. Thanks to the extremely short drying times and the fact that they can be covered soon after installation, they are precisely in line with the high demands posed by modern construction site organization.
Every step in the process from mixing through to application and perfect results is precisely planned and designed for the highest possible efficiency.
Substrate preparation:
The substrate must be clean, firm, sound and free from any grease, old coatings or other residues.
1. Priming
PCI Repahaft: Mortar bonding slurry for bonded screeds and cement mortars
2. Non-sag screed
PCI Novoment M1 plus: Ready-mixed, fast-setting screed mortar for fast-curing cement screeds, or alternatively PCI Novoment Light: Ready-mixed, light screed mortar for cement screeds with low dead weight
Flowable screed
PCI Novoment Flow: Ready-mixed flowable screed for self leveling screeds on insulating and isolating layers
Refurbishment of garage and outdoor floors
Over the course of time, damage to non-sealed screeds or concrete floors is inevitable as a result of a number of factors including mechanical loads, vehicle traffic, heating and frost, moisture, deicing salt or oil deposits. With PCI’s mineral system for the refurbishment of garage floors, you can rapidly repair erosion, breakouts and holes, as well as ensuring reliable, durable protection for a concrete floor or screed.
Substrate preparation:
The substrate must be clean, firm, sound and free from any grease, old coatings or other residues.
1. Leveling walls and floors:
PCI Nanocret R4 PCC: Heavy-duty repair mortar for concrete structures, and floors, walls and overhead applications
2. Repair mortar:
PCI Repafast Fluid: Flowable repair mortar for traffic areas and industrial floors
3. Primer:
PCI Gisogrund 404: Wash primer for absorbent and non-absorbent substrates. Apply two coats
4. Coating:
PCI Zemtec Outdoor: Cement-based coating for residential and commercial buildings
PCI Farbchips 05: Colored plastic chips for scattering on concrete floors
5. Impregnation:
PCI Zemtec Protect: two-component aqueous silicate impregnation agent for mineral floors
